Acid-base extraction

You don't need to be Editor-In-Chief to add or edit content to WikiDoc. You can begin to add to or edit text on this WikiDoc page by clicking on the edit button at the top of this page. Next enter or edit the information that you would like to appear here. Once you are done editing, scroll down and click the Save page button at the bottom of the page.

Please Take Over This Page and Apply to be Editor-In-Chief for this topic: There can be one or more than one Editor-In-Chief. You may also apply to be an Associate Editor-In-Chief of one of the subtopics below. Please mail us [1] to indicate your interest in serving either as an Editor-In-Chief of the entire topic or as an Associate Editor-In-Chief for a subtopic. Please be sure to attach your CV and or biographical sketch.

Acids and bases: Acid-base extraction Acid-base reaction Acid dissociation constant Acidity function Buffer solutions pH Proton affinity Self-ionization of water Acids: Lewis acids Mineral acids Organic acids Strong acids Superacids Weak acids Bases: Lewis bases Organic bases Strong bases Superbases Non-nucleophilic bases Weak bases edit

Acid-base extraction is a procedure using sequential liquid-liquid extractions to purify acids and bases from mixtures based on their chemical properties. Acid-base extraction is routinely performed during the work-up after chemical syntheses and for the isolation of compounds and natural products like alkaloids from crude extracts. The product is largely free of neutral and acidic or basic impurities. It is not possible to separate chemically similar acids or bases using this simple method.

Theory

The fundamental theory behind this technique is that salts, which are ionic, tend to be water-soluble while neutral molecules tend not to be.

The addition of an acid to a mixture of an organic acid and base will result in the acid remaining uncharged, while the base will be protonated. If the organic acid, such as a carboxylic acid, is sufficiently strong, its self-ionization can be suppressed by the added acid.

Conversely, the addition of a base to a mixture of an organic acid and base will result in the base remaining uncharged, while the acid is deprotonated to give the corresponding salt. Once again, the self-ionization of a strong base is suppressed by the added base.

The acid-base extraction procedure can also be used to separate very weak acids from stronger acids and very weak bases from stronger bases as long as the difference of their pK_a (or pK_b) constants is large enough. Examples are:

• Very weak acids with phenolic OH groups like phenol, 2-naphthol, or 4-hydroxyindole (pK_a around 10) from stronger acids like benzoic acid or sorbic acid (pK_a around 4 - 5)
• Very weak bases like caffeine or 4-nitroaniline (pK_b around 13 - 14) from stronger bases like mescaline or dimethyltryptamine (pK_b around 3 - 4)

Usually the pH is adjusted to a value roughly between the pK_a (or pK_b) constants of the compounds to be separated. Weak acids like citric acid, phosphoric acid, or diluted sulfuric acid are used for moderately acidic pH values and hydrochloric acid or more concentrated sulfuric acid is used for strongly acidic pH values. Similarly, weak bases like ammonia or sodium bicarbonate (NaHCO₃) are used for moderately basic pH values while stronger bases like potassium carbonate (K₂CO₃) or sodium hydroxide (NaOH) are used for strongly alkaline conditions.

Technique

Usually, the mixture is dissolved in a suitable solvent such as dichloromethane or ether, and poured into a separating funnel. An aqueous solution of the acid or base is added, and the pH of the aqueous phase is adjusted to bring the compound of interest into its required form. After shaking and allowing for phase separation, the phase containing the compound of interest is collected. The procedure is then repeated with this phase at the opposite pH range. The order of the step is not important and the process can be repeated to increase the separation. However, it is often convenient to have the compound dissolved the organic phase after the last step, so that evaporation of the solvent yields the product.

Limitations

The procedure works only for acids and bases with a large difference in solubility between their charged and their uncharged form. The procedure does not work for:

• Zwitterions with acidic and basic functional groups in the same molecule, e.g. glycine which tend to be water soluble at most pH.
• Very lipophilic amines that do not easily dissolve in the aqueous phase in their charged form, e.g triphenylamine and trihexylamine.
• Very lipophilic acids that do not easily dissolve in the aqueous phase in their charged form, e.g fatty acids.
• Lower amines amines like ammonia, methylamine, or triethanolamine which are miscible or significantly soluble in water at most pH.
• Hydrophilic acids like acetic acid, citric acid, and most inorganic acids like sulfuric acid or phosphoric acid.

Alternatives

Alternatives to acid-base extraction including:

• filtering the mixture through a plug of silica gel or alumina — charged salts tend to remain strongly adsorbed to the silica gel or alumina
• ion exchange chromatography can separate acids, bases, or mixtures of strong and weak acids and bases by their varying affinities to the column medium at different pH.

See also

• Separating funnel
• Multiphasic liquid
• Extraction
• Alkaloid
• Chromatography, a more powerful but more complex procedure to separate compounds

External links

• Acid base extraction

Separation processes

Image:ChemSepProcDiagram.svg

Processes

Acid-base extraction • Chromatography • Crystallization • Dissolved air flotation • Distillation • Drying • Electrochromatography • Filtration • Flocculation • Froth flotation • Liquid-liquid extraction • Recrystallization • Sedimentation • Sublimation

Devices

API oil-water separator • Centrifuge • Mixer-settler • Protein skimmer • Sublimation apparatus • Still

Multiphase systems

Aqueous two phase system • Azeotrope • Eutectic

This box: view • talk • edit