Needle gauge comparison chart
Editor-In-Chief: C. Michael Gibson, M.S., M.D. [1]
Please Take Over This Page and Apply to be Editor-In-Chief for this topic: There can be one or more than one Editor-In-Chief. You may also apply to be an Associate Editor-In-Chief of one of the subtopics below. Please mail us [2] to indicate your interest in serving either as an Editor-In-Chief of the entire topic or as an Associate Editor-In-Chief for a subtopic. Please be sure to attach your CV and or biographical sketch.
Overview
Hypodermic needles are available in a wide variety of outer diameters described by gauge numbers. Smaller gauge numbers indicate larger outer diameters. Inner diameter depends on both gauge and wall thickness. The following chart shows nominal inner diameter and wall thickness for regular-wall needles. Thin-wall needles (not shown) have identical outer diameters but larger inner diameters for a given gauge.
| Needle | Nominal Outer Diameter | Nominal Inner Diameter | Nominal Wall Thickness | ||||||
| Gauge | inches | mm | tol. inches (mm) | inches | mm | tol. inches (mm) | inches | mm | tol. inches (mm) |
| 7 | 0.180 | 4.572 | ±0.001 (±0.025) | 0.150 | 3.810 | ±0.003 (±0.076) | 0.015 | 0.381 | ±0.001 (±0.025) |
| 8 | 0.165 | 4.191 | " | 0.135 | 3.429 | " | " | " | " |
| 9 | 0.148 | 3.759 | " | 0.118 | 2.997 | " | " | " | " |
| 10 | 0.134 | 3.404 | " | 0.106 | 2.692 | " | 0.014 | 0.356 | " |
| 11 | 0.120 | 3.048 | " | 0.094 | 2.388 | " | 0.013 | 0.330 | " |
| 12 | 0.109 | 2.769 | " | 0.085 | 2.159 | " | 0.012 | 0.305 | " |
| 13 | 0.095 | 2.413 | " | 0.071 | 1.803 | " | " | " | " |
| 14 | 0.083 | 2.108 | " | 0.063 | 1.600 | " | 0.01 | 0.254 | " |
| 15 | 0.072 | 1.829 | ±0.0005 (±0.013) | 0.054 | 1.372 | ±0.0015 (±0.038) | 0.009 | 0.229 | ±0.0005 (±0.013) |
| 16 | 0.065 | 1.651 | " | 0.047 | 1.194 | " | " | " | " |
| 17 | 0.058 | 1.473 | " | 0.042 | 1.067 | " | 0.008 | 0.203 | " |
| 18 | 0.050 | 1.270 | " | 0.033 | 0.838 | " | 0.0085 | 0.216 | " |
| 19 | 0.042 | 1.067 | " | 0.027 | 0.686 | " | 0.0075 | 0.191 | " |
| 20 | 0.03575 | 0.9081 | ±0.00025 (±0.0064) | 0.02375 | 0.603 | ±0.00075 (±0.019) | 0.006 | 0.1524 | ±0.00025 (±0.0064) |
| 21 | 0.03225 | 0.8192 | " | 0.02025 | 0.514 | " | " | " | " |
| 22 | 0.02825 | 0.7176 | " | 0.01625 | 0.413 | " | " | " | " |
| 22s | " | " | " | 0.006 | 0.152 | " | 0.0111 | 0.2826 | " |
| 23 | 0.02525 | 0.6414 | " | 0.01325 | 0.337 | " | 0.006 | 0.1524 | " |
| 24 | 0.02225 | 0.5652 | " | 0.01225 | 0.311 | " | 0.005 | 0.1270 | " |
| 25 | 0.02025 | 0.5144 | " | 0.01025 | 0.260 | " | " | " | " |
| 26 | 0.01825 | 0.4636 | " | " | " | " | 0.004 | 0.1016 | " |
| 26s | 0.01865 | 0.4737 | " | 0.005 | 0.127 | " | 0.0068 | 0.1734 | |
| 27 | 0.01625 | 0.4128 | " | 0.00825 | 0.210 | " | 0.004 | 0.1016 | " |
| 28 | 0.01425 | 0.3620 | " | 0.00725 | 0.184 | " | 0.0035 | 0.0889 | " |
| 29 | 0.01325 | 0.3366 | " | " | " | " | 0.003 | 0.0762 | " |
| 30 | 0.01225 | 0.3112 | " | 0.00625 | 0.159 | " | " | " | " |
| 31 | 0.01025 | 0.2604 | " | 0.00525 | 0.133 | " | 0.0025 | 0.0635 | " |
| 32 | 0.00925 | 0.2350 | " | 0.00425 | 0.108 | " | " | " | " |
| 33 | 0.00825 | 0.2096 | " | " | " | " | 0.002 | 0.0508 | " |
| 34 | 0.00725 | 0.1842 | " | 0.00325 | 0.0826 | " | " | " | " |