Hemodialysis: Difference between revisions

Jump to navigation Jump to search
Line 14: Line 14:


The choice of the dialysate is important to maintain or correct the electrolytes.  
The choice of the dialysate is important to maintain or correct the electrolytes.  
* Potassium:  
* Sodium: Usually, sodium concentration of 140-145 mEq/L is suitable for most of the patients but, it could be adjusted based on patient's sodium level.
* Potassium: The potassium concentration in dialysate solution depends on patient potassium level. For example: For patients with hyperkalemia, a potassium concentration of 2-3 mEq/L is appropriate and for patients with hypokalemia, a potassium concentration of 4 mEq/L is appropriate.
* Calcium: Dialysate concentration for calcium are available with 2.5 ,3, or 3.5 mEq/L. In most of the cases a 2.5 mEq/L solution which is equivalent to 5 mg/dl ionized calcium is used.


==Vascular Access==
==Vascular Access==

Revision as of 19:15, 2 July 2018

Dialysis Main Page

Patient Information

Overview

Components

Dialyzer
Dialysate
Blood Delivery System

Vascular Access

Anticoagulation

Monitoring and Adequacy

Editor-In-Chief: C. Michael Gibson, M.S., M.D. [1]Associate Editor(s)-in-Chief: Seyedmahdi Pahlavani, M.D. [2]

Overview

The goals of hemodialysis are removing toxins and aim to maintain euvolemia. Ninety three percent of ESRD patients in the United States and 89% worldwide, are under hemodialysis.[1] Solute diffusion across a membrane is the basic principle for hemodialysis. Metabolic waste products move across a semipermeable membrane depending on their concentration gradient between plasma and dialysate. Concentration gradient, membrane surface area, the membrane thickness, and size of solute molecule are important factors determining rate of diffusion. Small molecules clear more efficiently than larger molecules. Fluid removal is another advantage of hemodialysis that could be achieved by ultrafiltration. In-center hemodialysis and home hemodialysis are available for ESRD patients requiring renal replacement therapy; the choice of modality is based on patient condition, patient preference, and the availability of equipments.

Components

The Dialyzer

Dialyzer is usually made of bundles of hollow fibers permitting a high flow rate of blood and dialysate simultaneously. Parallel plates are another type of dialyzer that are barely used recently. Most of the dialyzers are synthetic with a variety of materials including polyamide, polyarylethersulfone, polyvinylpyrrolidone, polyacrylonitrile, and polysulfone. Biocompatible membranes have the advantage of not activating complement system.

The Dialysate

The dialysate is a paramount composition in hemodialysis. Solutes diffuse across the dialyzer between blood and dialysate. The dialysate composition should be individualized to restore plasma normal values. The main solutes in dialysate include sodium, potassium, calcium, magnesium, chloride, bicarbonate , and glucose. These electrolytes are treated with water during the process. About 100 liters of water is needed for each dialysis session. The water used for hemodialysis should be processed in order to have a balanced concentration of solutes. Also, contaminants including bacteria, viruses, and heavy metals, such as aluminium should be removed from water. This removal could be done either by using reverse osmosis or deionization. Filters may be used to improve water quality by removing particles.

The choice of the dialysate is important to maintain or correct the electrolytes.

  • Sodium: Usually, sodium concentration of 140-145 mEq/L is suitable for most of the patients but, it could be adjusted based on patient's sodium level.
  • Potassium: The potassium concentration in dialysate solution depends on patient potassium level. For example: For patients with hyperkalemia, a potassium concentration of 2-3 mEq/L is appropriate and for patients with hypokalemia, a potassium concentration of 4 mEq/L is appropriate.
  • Calcium: Dialysate concentration for calcium are available with 2.5 ,3, or 3.5 mEq/L. In most of the cases a 2.5 mEq/L solution which is equivalent to 5 mg/dl ionized calcium is used.

Vascular Access

Anticoagulation

Monitoring and Adequacy

References

  1. Collins AJ, Foley RN, Gilbertson DT, Chen SC (June 2015). "United States Renal Data System public health surveillance of chronic kidney disease and end-stage renal disease". Kidney Int Suppl (2011). 5 (1): 2–7. doi:10.1038/kisup.2015.2. PMC 4455192. PMID 26097778.