Catalysis

Revision as of 23:34, 8 August 2012 by WikiBot (talk | contribs) (Bot: Automated text replacement (-{{SIB}} + & -{{EH}} + & -{{EJ}} + & -{{Editor Help}} + & -{{Editor Join}} +))
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


In chemistry and biology, catalysis is the acceleration (increase in rate) of a chemical reaction by means of a substance called a catalyst, which is itself not consumed by the overall reaction. More generally, one may at times call anything that accelerates a process, a "catalyst" (f related to the verb καταλύειν, meaning to annul or to untie or to pick up.

A catalyst provides an alternative route to products, the catalytic route being subject to lower activation energy than in the uncatalyzed reaction. A lowered activation energy increases the reaction rate. Catalysts change in the course of a reaction but are regenerated.

A good example of a catalyst is in the disproportionation of hydrogen peroxide to give water and oxygen:

2 H2O2 → 2 H2O + O2

This reaction is slow (hence one can buy solutions of hydrogen peroxide). Upon the addition of manganese dioxide to hydrogen peroxide, the reaction occurs rapidly as signaled by effervescence of oxygen. In demonstrations, the evolved oxygen is detectable by its effect on a glowing splint. The manganese dioxide may be recovered, and re-used indefinitely, thus it is a catalyst — it is not consumed by the reaction. (The H2O2 sold as a sterilizing agent in drugstores is too dilute for this to work dramatically.)

A promoter chemically modifies a catalyst but is not itself a catalyst. An inhibitor reduces the effectiveness of (or slows down the effect of) a catalyst.

History

The phrase catalysis was coined by Jöns Jakob Berzelius who in 1835 was the first to note that certain chemicals speed up a reaction. Other early chemists involved in catalysis were Alexander Mitscherlich who in 1831[citation needed] referred to contact processes and Johann Wolfgang Döbereiner who spoke of contact action and whose lighter based on hydrogen and a platinum sponge became a huge commercial success in the 1820’s. In the 1880s, Wilhelm Ostwald at Leipzig University started a series of systematic investigations into reactions that were catylized by the presence of acids and bases, and found both that chemical reactions occur at finite rates, and that these rates can be used to determine the strengths of acids and bases. For this work, Ostwald was awarded the 1909 Nobel Prize in Chemistry.

Definitions

Catalysts generally react with one or more reactants to form an intermediate that subsequently give the final reaction product, in the process regenerating the catalyst. The following is a typical reaction scheme, where C represents the catalyst, A and B are reactants, and D is the product of the reaction of A and B:

A + C → AC (1)
B + AC → ABC (2)
ABC → CD (3)
CD → C + D (4)

Although the catalyst (C) is consumed by reaction 1, it is subsequently produced by reaction 4, so for the overall reaction:

A + B → D

Catalytic cycles

A catalytic cycle is another term for mechanism. Catalytic cycles are central to any discussion of catalysis, be it in biochemistry, organometallic chemistry, or solid state chemistry.

Often, a so-called sacrificial catalyst is also part of the reaction system with the purpose of regenerating the true catalyst in each cycle. As the name implies the sacrificial catalyst is not regenerated and is instead irreversibly consumed. This sacrificial compound is also known as a stoichiometric catalyst when added in stoichiometric quantities compared to the main reactant. Usually the true catalyst is an expensive and complex molecule and added in quantities as small as possible. The stoichiometric catalyst on the other hand should be cheap and abundant.

Catalysts and reaction energetics

Generic potential energy diagram showing the effect of a catalyst in an hypothetical exothermic chemical reaction. The presence of the catalyst opens a different reaction pathway (shown in red) with a lower activation energy. The final result and the overall thermodynamics are the same.

Catalysts work by providing an (alternative) mechanism involving a different transition state and lower activation energy. The effect of this is that more molecular collisions have the energy needed to reach the transition state. Hence, catalysts can perform reactions that, albeit thermodynamically feasible, would not run without the presence of a catalyst, or perform them much faster, more specific, or at lower temperatures. This can be observed on a Boltzmann distribution and energy profile diagram. This means that catalysts reduce the amount of energy needed to start a chemical reaction.

Catalysts cannot make energetically unfavorable reactions possible — they have no effect on the chemical equilibrium of a reaction because the rate of both the forward and the reverse reaction are equally affected (see also thermodynamics). The net free energy change of a reaction is the same whether a catalyst is used or not; the catalyst just makes it easier to activate.

The SI derived unit for measuring the catalytic activity of a catalyst is the katal, which is moles per second. The degree of activity of a catalyst can also be described by the turn over number (or TON) and the catalytic efficiency by the turn over frequency (TOF). The biochemical equivalent is the enzyme unit.

For more information on the efficiency of enzymatic catalysis see the Enzyme#Kinetics section.

Autocatalysis

In autocatalysis, a reaction produces catalysts.

Types of catalysts

Catalysts can be either heterogeneous or homogeneous. Biocatalysts are often seen as a separate group.

Heterogeneous catalysts are present in different phases from the reactants (for example, a solid catalyst in a liquid reaction mixture), whereas homogeneous catalysts are in the same phase (for example, a dissolved catalyst in a liquid reaction mixture).

Heterogeneous catalysts

A simple model for heterogeneous catalysis involves the catalyst providing a surface on which the reactants (or substrates) temporarily become adsorbed. Bonds in the substrate become weakened sufficiently for new bonds to be created. The bonds between the products and the catalyst are weaker, so the products are released. Different possible mechanisms for reactions on surfaces are known, depending on how the adsorption takes place (Langmuir-Hinshelwood and Eley-Rideal).

For example, in the Haber process to manufacture ammonia, finely divided iron acts as a heterogeneous catalyst. Active sites on the metal allow partial weak bonding to the reactant gases, which are adsorbed onto the metal surface. As a result, the bond within the molecule of a reactant is weakened and the reactant molecules are held in close proximity to each other. In this way the particularly strong triple bond in nitrogen is weakened and the hydrogen and nitrogen molecules are brought closer together than would be the case in the gas phase, so the rate of reaction increases.

Other heterogeneous catalysts include vanadium(V) oxide in the contact process, nickel in the manufacture of margarine, alumina and silica in the cracking of alkanes and platinum rhodium palladium in catalytic converters. Mesoporous silicates have found utility in heterogeneous reaction catalysis because their large accessible surface area allows for high catalyst loading.

In car engines, incomplete combustion of the fuel produces carbon monoxide, which is toxic. The electric spark and high temperatures also allow oxygen and nitrogen to react and form nitrogen monoxide and nitrogen dioxide, which are responsible for photochemical smog and acid rain. Catalytic converters reduce such emissions by adsorbing CO and NO onto catalytic surface, where the gases undergo a redox reaction. Carbon dioxide and nitrogen are desorbed from the surface and emitted as relatively harmless gases:

2CO + 2NO → 2CO2 + N2

Many catalysts used in refineries and in petrochemical applications are regenerated and reused multiple times to save costs and energy and to reduce environmental impact from recycling or disposal of spent catalysts.

Homogeneous catalysts

Homogeneous catalysts are in the same phase as the reactants.

In homogeneous catalysis the catalyst is a molecule which facilitates the reaction. The reactant(s) coordinate to the catalyst (or vice versa), are transformed to product(s), which are then released from the catalyst.

Examples of homogeneous catalysts are H+(aq) which acts as a catalyst in esterification, and chlorine free radicals in the break down of ozone. Chlorine free radicals are formed by the action of ultraviolet radiation on chlorofluorocarbons (CFCs). They react with ozone forming oxygen molecules and regenerating chlorine free radicals which then in turn destroys the thin layer that is the ozone.

Cl· + O3 → ClO· + O2
ClO· + O· → Cl· + O2

Biocatalysts

In nature enzymes are catalysts in the metabolic pathway. In biochemistry catalysis is also observed with abzymes, ribozymes and deoxyribozymes. Biocatalysts can be thought of as a mixture of a homogenous and heterogeneous catalyst. This is because the enzyme is in solution itself, but the reaction takes place on the enzyme surface.

Electrocatalysts

In the context of electrochemistry, specifically in fuel cell engineering, various metal-rich catalysts are used to promote the efficiency of a half reaction that occurs within the fuel cell. One common type of fuel cell electrocatalyst is based upon tiny nanoparticles of platinum which adorn slightly larger carbon particles. When this type of platinum electrocatalyst is in contact with one of the electrodes in a fuel cell, it increases the rate of the redox half reaction in which oxygen gas is reduced to water (or hydroxide or hydrogen peroxide).

Significance

Catalysis is of paramount importance in the chemical industry. The production of most industrially important chemicals involves catalysis. The earliest commercial processes are the Haber process for ammonia synthesis and the Fischer-Tropsch synthesis. Research into catalysis is a major field in applied science, and involves many fields of chemistry, notably in organometallic chemistry, and physics. Catalysis is important in many aspects of environmental science, from the catalytic converter in automobiles to the causes of the ozone hole. Catalytic, rather than stoichiometric reactions are preferred in environmentally friendly green chemistry due to the reduced amount of waste generated.

Notable examples

Estimates are that 90% of all commercially produced chemical products involve catalysts at some stage in the process of their manufacture.[1]

Manganese dioxide is used in the laboratory to prepare oxygen by the decomposition of hydrogen peroxide to oxygen and water.

Well-known applications of synthetic catalysts are:

Examples of catalysts that perform specific transformations on functional groups:

These given examples show that different catalysts perform other transformations on the same functional groups, where the reaction would not proceed, proceed very slowly, or proceed in an unselective manner without the presence of the catalyst.

The most common catalyst is the proton. Many transition metals and transition metal complexes are used in catalysis as well.

New directions - organocatalysis

While transition metal catalysts are well established, a new trend is toward organocatalysis which use comparatively simple organic molecules as catalysts. While typically, catalyst loading is much higher than transition metal-based catalysts, the catalysts are usually commercially available in bulk, helping to reduce costs drastically. Organocatalysts of the "new generation" are competitive to traditional metal-containing catalysts and are owing to low product inhibition applicable in substoichiometric quantities. The chemical character of organocatalysts offers new and attractive perspectives and advantages to synthetically working chemists.

Catalytic processes

See also

References

  1. "Recognizing the Best in Innovation: Breakthrough Catalyst". R&D Magazine, September 2005, pg 20.

External links

bs:Katalizator bg:Катализа ca:Catalitzador cs:Katalyzátor cy:Catalysis de:Katalysator et:Katalüsaator el:Καταλύτης eo:Katalizilo gl:Catalizador ko:촉매 hr:Katalizator io:Katalizo id:Katalis it:Catalizzatore he:זרז lv:Katalizators lt:Katalizatorius mk:Катализатор nl:Katalysator no:Katalysator nn:Katalysator nov:Katalise sq:Katalizatori simple:Catalyst sk:Katalyzátor (chémia) sr:Катализатор su:Katalis fi:Katalyytti sv:Katalysator ta:வினைவேக மாற்றி uk:Каталізатор Understand Catalysts for KIDZ!: Catalysts speed up the sometimes slow process in reactions. An example is when you blow on a fire, the flame rises and becomes bigger. That is what a catalyst does.

Template:Jb1

Template:WikiDoc Sources