Ammeter

Jump to navigation Jump to search
Ammeter
File:Galvanometer diagram.png
Wire carrying current to be measured.
Spring providing restoring force
File:Ammeter from New York Terminal Service Plant, 250 West Thirty-first Street 351263pv.jpg
Ammeter from the old Penn Station Terminal Service Plant at 250 West Thirty-first Street
File:Zero-Center Ammeter.JPG
Zero-center ammeter

WikiDoc Resources for Ammeter

Articles

Most recent articles on Ammeter

Most cited articles on Ammeter

Review articles on Ammeter

Articles on Ammeter in N Eng J Med, Lancet, BMJ

Media

Powerpoint slides on Ammeter

Images of Ammeter

Photos of Ammeter

Podcasts & MP3s on Ammeter

Videos on Ammeter

Evidence Based Medicine

Cochrane Collaboration on Ammeter

Bandolier on Ammeter

TRIP on Ammeter

Clinical Trials

Ongoing Trials on Ammeter at Clinical Trials.gov

Trial results on Ammeter

Clinical Trials on Ammeter at Google

Guidelines / Policies / Govt

US National Guidelines Clearinghouse on Ammeter

NICE Guidance on Ammeter

NHS PRODIGY Guidance

FDA on Ammeter

CDC on Ammeter

Books

Books on Ammeter

News

Ammeter in the news

Be alerted to news on Ammeter

News trends on Ammeter

Commentary

Blogs on Ammeter

Definitions

Definitions of Ammeter

Patient Resources / Community

Patient resources on Ammeter

Discussion groups on Ammeter

Patient Handouts on Ammeter

Directions to Hospitals Treating Ammeter

Risk calculators and risk factors for Ammeter

Healthcare Provider Resources

Symptoms of Ammeter

Causes & Risk Factors for Ammeter

Diagnostic studies for Ammeter

Treatment of Ammeter

Continuing Medical Education (CME)

CME Programs on Ammeter

International

Ammeter en Espanol

Ammeter en Francais

Business

Ammeter in the Marketplace

Patents on Ammeter

Experimental / Informatics

List of terms related to Ammeter


An ammeter is a measuring instrument used to measure the electric current in a circuit. Electric currents are measured in amperes, hence the name. The word "ammeter" is commonly misspelled or mispronounced as "ampmeter" or "ameter" by some.

The earliest design is the D'Arsonval galvanometer or moving coil ammeter. It uses magnetic deflection, where current passing through a coil causes the coil to move in a magnetic field. The voltage drop across the coil is kept to a minimum to minimize resistance across the ammeter in any circuit into which it is inserted.

Moving iron ammeters use a piece or pieces of iron which move when acted upon by the electromagnetic force of a fixed coil of (usually heavy gauge) wire. This type of meter responds to both direct and alternating currents (as opposed to the moving coil ammeter, which works on direct current only).

To measure larger currents, a resistor called a shunt is placed in parallel with the meter. Most of the current flows through the shunt, and only a small fraction flows through the meter. This allows the meter to measure large currents. Traditionally, the meter used with a shunt has a full-scale deflection (FSD) of 50 mV, so shunts are typically designed to produce a voltage drop of 50 mV when carrying their full rated current.

Zero-center ammeters are used for applications requiring current to be measured with both polarities, common in scientific and industrial equipment. Zero-center ammeters are also commonly placed in series with a battery. In this application, the charging of the battery deflects the needle to one side of the scale (commonly, the right side) and the discharging of the battery deflects the needle to the other side.

Digital ammeter designs use an analog to digital converter (ADC) to measure the voltage across the shunt resistor; the digital display is calibrated to read the current through the shunt.

Since the ammeter shunt has a very low resistance, mistakenly wiring the ammeter in parallel with a voltage source will cause a short circuit, at best blowing a fuse, possibly damaging the instrument and wiring, and exposing an observer to injury. In AC circuits, a current transformer converts the magnetic field around a conductor into a small AC current, typically either 1 or 5 Amps at full rated current, that can be easily read by a meter. In a similar way, accurate AC/DC non-contact ammeters have been constructed using Hall effect magnetic field sensors. A portable hand-held clamp-on ammeter is a common tool for maintenance of industrial and commercial electrical equipment, which is temporarily clipped over a wire to measure current.

Ammeter Schematic Symbol

The ammeter symbol (A) is shown in the diagram.

See also

ar:مقياس التيار الكهربائي bg:Амперметър ca:Amperímetre cs:Ampérmetr da:Amperemeter de:Strommesser el:Αμπερόμετρο eo:Ampermetro fa:آمپرسنج gl:Amperímetro it:Amperometro he:מד זרם lt:Ampermetras hu:Villamos műszerek nl:Ampèremeter simple:Ammeter sl:Ampermeter fi:Ampeerimittari sv:Amperemeter uk:Амперметр


Template:WH Template:WS