Thorium dioxide

You don't need to be Editor-In-Chief to add or edit content to WikiDoc. You can begin to add to or edit text on this WikiDoc page by clicking on the edit button at the top of this page. Next enter or edit the information that you would like to appear here. Once you are done editing, scroll down and click the Save page button at the bottom of the page.

Thorium dioxide
Image:Thorium dioxide.jpg
IUPAC name	Thorium dioxide Thorium(IV) oxide
Other names	Thoria
Identifiers
CAS number	1314-20-1
Properties
Molecular formula	ThO2
Molar mass	264.04 g/mol
Appearance	white odorless solid
Density	9.86 g/cm3, solid
Melting point	3220 °C
Boiling point	4400°C
Solubility in water	Insoluble
Structure
Crystal structure	Fluorite
Coordination geometry	Octahedral
Thermochemistry
Std enthalpy of formation ΔfHo298	? kJ/mol
Standard molar entropy So298	? J.K−1.mol−1
Hazards
EU classification	not listed
Related Compounds
Other cations	Hafnium dioxide Protactinium pentoxide Uranium trioxide Neptunium pentoxide Plutonium dioxide
Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa) Infobox disclaimer and references

Thorium dioxide (ThO₂), also called thorium(IV) oxide (IUPAC) is a white, crystalline powder. It was formerly known as thoria or thorina. It is produced mainly as a by-product of lanthanide and uranium production^[1].

Chemistry

The compound is radioactive due to the radioactivity of thorium. Thorium dioxide can be used as a nuclear fuel. (Refer to the article of thorium for more information on this application.) The high thermal stability of thorium dioxide allows applications in flame spraying and high temperature ceramics. Thorium dioxide was the primary ingredient in the X-ray contrast medium Thorotrast. Use of Thorotrast was abandoned when it was found to be a carcinogen, sometimes causing cholangiocarcinoma. Today, barium sulfate is the standard X-ray contrast agent. Thoria has the fluorite crystal structure. Few other binary dioxides have this structure: uranium dioxide, hafnium dioxide and cerium dioxide, not to mention plutonium dioxide. The band gap of thoria is about 6 eV.

Applications

Thorium dioxide is used as a stabilizer in tungsten electrodes in TIG welding,electron tubes, and aircraft engines. As an alloy, thoriated tungsten metal is not easily deformed because the high fusion material thoria augments the high temperature mechanical properties, and thorium helps stimulate the emission of electrons (thermions). It is the most popular oxide additive because of its low cost, but is being phased out in favor of non-radioactive elements such as cerium, lanthanum and zirconium.

A major use in the past was in gas mantles of laterns, which were frequently composed of 99% ThO₂ and 1% cerium(IV) oxide. Even as late as the 1980's it was estimated that about half of all ThO₂ produced (several hundred tonnes per year) was used for this purpose^[1]. Some mantles still use thorium, but yttrium oxide (or sometimes zirconium oxide) is used increasingly as a replacement.

Thorium dioxide was formerly added to glasses during manufacture to increase their refractive index, producing thoriated glass with up to 40% ThO₂ content. These glasses were used in the construction of high-quality photographic lenses. However, the radioactivity of the thorium caused both a safety and pollution hazard and self-degradation of the glass (turning it yellow or brown over time). Lanthanum oxide has replaced thorium dioxide in almost all modern high-index glasses.

The melting point of thorium oxide is 3300°C - the highest of all oxides. Only a few elements (including tungsten and carbon) and a few compounds (including tantalum carbide) have higher melting points.

References

1. N. N. Greenwood, A. Earnshaw, Chemistry of the Elements, Pergamon Press, Oxford, UK, 1984. See pages 1425, 1456.de: Thoriumdioxid

Acknowledgement and Attribution Regarding Sources of Content

Some of the initial content on this page may be incorporated in part from copyleft sources in the public domain including wikis such as Wikipedia and AskDrWiki. Drug information for patients came from the The National Library of Medicine. Infectious disease information may have come from the Centers for Disease Control (CDC). Differential Diagnoses are drawn from clinicians as well as an amalgamation of 3 sources: 1.The Disease Database; 2. Kahan, Scott, Smith, Ellen G. In A Page: Signs and Symptoms. Malden, Massachusetts: Blackwell Publishing, 2004:3; 3. Sailer, Christian, Wasner, Susanne. Differential Diagnosis Pocket. Hermosa Beach, CA: Borm Bruckmeir Publishing LLC, 2002:7 .